Lexus IS300 Manual 350Z 370Z 6-speed Transmission Swap Kit
We have created a new way to get a 6-speed into your IS300 using any of the Nissan 350Z/370Z 6-speed transmissions. This Kit will get the 350Z(CD009) or 370Z(JK40x) 6-Speed Transmissions bolted up into your IS300 with minimal effort!
The Kit includes the following parts (which are subject to change at any moment without notice as better more readily available parts come onto the market)
-A340 Automatic Bell housing Adapter Plate (Requires A340 Automatic Transmission J1 or J2 bell housing (stock IS300 is J2), You can use any J3 bell housing as well at an additional cost, see the drop-down menu below)
-Aluminum light weight 3-piece Flywheel
-ARP Flywheel Fasteners (torque to 56lbftf in 20lbftf increments, alternating and adjacent)
-Clutch System to hold your torque requirement (specify your torque goals in drop-down menu)
-Clutch Fasteners (Are included if you purchase a clutch from us)
-T56 Slave cylinder
-Clutch line
-Adapter for clutch line to plug into your master cylinder
-Clutch line to mate up to your IS300 Master Cylinder (you provide IS300 Master Cylinder, Celica GTS master Cylinder works for IS300 Also) -Transmission Crossmember (with bolts)
-Transmission mount isolator
-1-piece Driveshaft (specify Steel or Aluminum in drop-down menu)
-Adapter plate bolts to Fasten the transmission to the adapter plate
WE NOW HAVE COMPLETE, BRAND NEW CD009 TRANSMISSIONS FROM NISSAN, ALREADY ASSEMBLED READY TO INSTALL!!! Add one through the drop down menu below!
This kit does not include the following parts that are required to complete the swap:
-Aisin A340 Automatic transmission J1 or J2 bell housing (You Can Purchase this in the drop-down menu Below) (found on 1991-1997 SC300 Automatics, early model Automatic GS300, and most JDM 1JZGTE vvti Automatic Engine/Transmission swaps)
-Bell housing bolts to the block (this will come off of whichever automatic transmission you pull off the bell housing from)
-IS300 Manual Clutch pedal assembly
-IS300 Manual master cylinder (Toyota Celica GTS master Cylinder works for IS300 Also)
To eliminate the CEL and pass emissions we recommend using the following parts to simulate the stock Automatic Transmission Pump speed function, and solenoid resistance: Transmission Simulator: https://all4swap.ru/product/atemu 3 resistors to eliminate CEL: https://www.digikey.com/product-detail/en/riedon/UAL25-10RF8/696-1497-ND/3886586
This kit comes with 7-pages of thorough instructions.
As Always, if you have any questions feel free to call or text us at 803-792-7189.
We have created a new way to get a 6-speed into your IS300 using any of the Nissan 350Z/370Z 6-speed transmissions. This Kit will get the 350Z(CD009) or 370Z(JK40x) 6-Speed Transmissions bolted up into your IS300 with minimal effort!
The Kit includes the following parts (which are subject to change at any moment without notice as better more readily available parts come onto the market)
-A340 Automatic Bell housing Adapter Plate (Requires A340 Automatic Transmission J1 or J2 bell housing (stock IS300 is J2), You can use any J3 bell housing as well at an additional cost, see the drop-down menu below)
-Aluminum light weight 3-piece Flywheel
-ARP Flywheel Fasteners (torque to 56lbftf in 20lbftf increments, alternating and adjacent)
-Clutch System to hold your torque requirement (specify your torque goals in drop-down menu)
-Clutch Fasteners (Are included if you purchase a clutch from us)
-T56 Slave cylinder
-Clutch line
-Adapter for clutch line to plug into your master cylinder
-Clutch line to mate up to your IS300 Master Cylinder (you provide IS300 Master Cylinder, Celica GTS master Cylinder works for IS300 Also) -Transmission Crossmember (with bolts)
-Transmission mount isolator
-1-piece Driveshaft (specify Steel or Aluminum in drop-down menu)
-Adapter plate bolts to Fasten the transmission to the adapter plate
WE NOW HAVE COMPLETE, BRAND NEW CD009 TRANSMISSIONS FROM NISSAN, ALREADY ASSEMBLED READY TO INSTALL!!! Add one through the drop down menu below!
This kit does not include the following parts that are required to complete the swap:
-Aisin A340 Automatic transmission J1 or J2 bell housing (You Can Purchase this in the drop-down menu Below) (found on 1991-1997 SC300 Automatics, early model Automatic GS300, and most JDM 1JZGTE vvti Automatic Engine/Transmission swaps)
-Bell housing bolts to the block (this will come off of whichever automatic transmission you pull off the bell housing from)
-IS300 Manual Clutch pedal assembly
-IS300 Manual master cylinder (Toyota Celica GTS master Cylinder works for IS300 Also)
To eliminate the CEL and pass emissions we recommend using the following parts to simulate the stock Automatic Transmission Pump speed function, and solenoid resistance: Transmission Simulator: https://all4swap.ru/product/atemu 3 resistors to eliminate CEL: https://www.digikey.com/product-detail/en/riedon/UAL25-10RF8/696-1497-ND/3886586
This kit comes with 7-pages of thorough instructions.
As Always, if you have any questions feel free to call or text us at 803-792-7189.
| Manufacturer's Suggested Retail Price | $3,299.99 |
|---|