2JZGTE 1JZGTE VVTI Engine To BMW E90 E91 E92 E93

2JZGTE 1JZGTE VVTI Engine To BMW E90 E91 E92 E93

Honda K-Series to Mazda RX-8 Adapter Plate and Flywheel Combo

Honda K-Series to Mazda RX-8 Adapter Plate and Flywheel Combo

2JZGTE 1JZGTE VVTI Engine To BMW E90 E91 E92 E93 Stage 6 Twin Disc (1100ftlbs) Swap Kit

We are now manufacturing the JZ engine to BMW E90 / E92 / E93, and F30 / F31 / F32 / F33 Model Adapter plate and flywheel combinations. You need the following components to make this system work on your Engine and Transmission Combination:
-Toyota 2JZ Starter (open faced starter)
-Your stock Clutch release bearing and fork mechanism from your transmission.
-Your Stock BMW Slave Cylinder We are the only company to include Studs to use the 2JZ starter so that you can remove the starter without having to remove the transmission and engine assembly.

You simply drill out the threads on your current 2JZ starter and use the supplied M10 studs, and nuts. Each one of our 2JZ adapter plates comes with both dowel pin recesses machined into the plate, and the proper dowels for the BMW transmission. We include BOTH of the BMW dowels with the adapter plate to ensure that the transmission stays centered on the rotating assembly properly.

The Following Transmissions will bolt up to this adapter plate:
2008-2013 328i, 328xi, 330i, 330xi, 335i, 335is, 335xi 6-speed Manual transmissions

The Adapter Plate comes with the following parts:
-2JZ/1JZ to BMW ZF Transmission Adapter Plate
-Pilot Bearing Adapter for the BMW ZF transmission input shaft to recess into the 2JZ/1JZ crank boss
-ALL OF THE ENGINE SIDE FASTENERS! Transmission side: (2) M12 x 1.75 Socket Head Cap Screws (2) M12 x 1.75 Socket Head Cap Screws (2) M10 x 1.50 Socket Head Cap Screws (3) M8 x 1.25 Socket Head Cap Screws This is all of the fasteners needed to bolt the adapter plate to the engine and the transmission to the adapter plate.

The corresponding custom flywheel wheel is available on the drop-down menu located below. This adapter plate is made from 3/4" Aluminum, and precision machined on Okuma CNC machines, and as always MADE IN AMERICA

The average lead time for adapter plates is 30days. Most adapter plates are instock, however occasionally some adapters go out of stock. We strive to give you the best possible customer service, if you have any questions don't hesitate to hit our contact page for the quickest response!!

$3,248.00
Availability: In stock
SKU
BMWTwinDisc

We are now manufacturing the JZ engine to BMW E90 / E92 / E93, and F30 / F31 / F32 / F33 Model Adapter plate and flywheel combinations. You need the following components to make this system work on your Engine and Transmission Combination:
-Toyota 2JZ Starter (open faced starter)
-Your stock Clutch release bearing and fork mechanism from your transmission.
-Your Stock BMW Slave Cylinder We are the only company to include Studs to use the 2JZ starter so that you can remove the starter without having to remove the transmission and engine assembly.

You simply drill out the threads on your current 2JZ starter and use the supplied M10 studs, and nuts. Each one of our 2JZ adapter plates comes with both dowel pin recesses machined into the plate, and the proper dowels for the BMW transmission. We include BOTH of the BMW dowels with the adapter plate to ensure that the transmission stays centered on the rotating assembly properly.

The Following Transmissions will bolt up to this adapter plate:
2008-2013 328i, 328xi, 330i, 330xi, 335i, 335is, 335xi 6-speed Manual transmissions

The Adapter Plate comes with the following parts:
-2JZ/1JZ to BMW ZF Transmission Adapter Plate
-Pilot Bearing Adapter for the BMW ZF transmission input shaft to recess into the 2JZ/1JZ crank boss
-ALL OF THE ENGINE SIDE FASTENERS! Transmission side: (2) M12 x 1.75 Socket Head Cap Screws (2) M12 x 1.75 Socket Head Cap Screws (2) M10 x 1.50 Socket Head Cap Screws (3) M8 x 1.25 Socket Head Cap Screws This is all of the fasteners needed to bolt the adapter plate to the engine and the transmission to the adapter plate.

The corresponding custom flywheel wheel is available on the drop-down menu located below. This adapter plate is made from 3/4" Aluminum, and precision machined on Okuma CNC machines, and as always MADE IN AMERICA

The average lead time for adapter plates is 30days. Most adapter plates are instock, however occasionally some adapters go out of stock. We strive to give you the best possible customer service, if you have any questions don't hesitate to hit our contact page for the quickest response!!

Write Your Own Review
You're reviewing:2JZGTE 1JZGTE VVTI Engine To BMW E90 E91 E92 E93 Stage 6 Twin Disc (1100ftlbs) Swap Kit
Your Rating