1UZFE Stage 2 Clutch Disk and Pressure Plate (300ft lbs)

1UZFE Stage 2 Clutch Disk and Pressure Plate (300ft lbs)

JZ to Z32 300ZX Stage 4 Clutch System

JZ to Z32 300ZX Stage 4 Clutch System

Mazda RX8 to Honda K-series K24 K20 Engine Mount brackets

This listing is for a set of engine brackets that will aid you in bolting the Honda K-series engine into the Mazda RX8 Chassis. These engine Brackets were designed to use the (Collins adapters Honda K-Series K24 to Mazda RX8 Transmission adapter plate) in order to get the engine and transmission to bolt up in the correct spot. These engine brackets only work with the Collins adapter plate due to the thickness of the adapter. These engine brackets will shift the engine and transmission around a bit in the engine bay however the transmission will fit into its stock position (as far forward as possible) and will use the factory PPF brace and the factory carbon fiber driveshaft.

What is included in the kit:
Passenger side and driver's side Engine Brackets to bolt the engine into the Mazda RX8 chassis
Fasteners to bolt the engine brackets to the engine.

What is required:
You will need to grind down a small hump on the upper oil pan, directly above where the oil bolt goes through the aluminum casting on the passenger side(USDM).
You will need to use the Stock Mazda RX8 rubber engine Isolators
You need to cut the front crossmember to get the stock oil pan to fit into the engine bay properly
You need to Hammer the firewall heavily to get the engine far enough back in order to drop the engine and transmission into the chassis.
There will be the wiper cowling that will hit the top of the engine as the engine is too tall, you will need to remove cut out the section of wiper cowling that interrupts the top of the valve cover.

Watch this Video to see how to install this full system:

If you have any questions or want to check stock please call 803-792-7189

$269.99
Availability: In stock
SKU
MM00824, MM00924

This listing is for a set of engine brackets that will aid you in bolting the Honda K-series engine into the Mazda RX8 Chassis. These engine Brackets were designed to use the (Collins adapters Honda K-Series K24 to Mazda RX8 Transmission adapter plate) in order to get the engine and transmission to bolt up in the correct spot. These engine brackets only work with the Collins adapter plate due to the thickness of the adapter. These engine brackets will shift the engine and transmission around a bit in the engine bay however the transmission will fit into its stock position (as far forward as possible) and will use the factory PPF brace and the factory carbon fiber driveshaft.

What is included in the kit:
Passenger side and driver's side Engine Brackets to bolt the engine into the Mazda RX8 chassis
Fasteners to bolt the engine brackets to the engine.

What is required:
You will need to grind down a small hump on the upper oil pan, directly above where the oil bolt goes through the aluminum casting on the passenger side(USDM).
You will need to use the Stock Mazda RX8 rubber engine Isolators
You need to cut the front crossmember to get the stock oil pan to fit into the engine bay properly
You need to Hammer the firewall heavily to get the engine far enough back in order to drop the engine and transmission into the chassis.
There will be the wiper cowling that will hit the top of the engine as the engine is too tall, you will need to remove cut out the section of wiper cowling that interrupts the top of the valve cover.

Watch this video to see how it goes in:

If you have any questions or want to check stock please call 803-792-7189

More Information
Manufacturer's Suggested Retail Price $349.99
Write Your Own Review
You're reviewing:Mazda RX8 to Honda K-series K24 K20 Engine Mount brackets
Your Rating